The 6th Taiwan Perovskite Technology and Applications Forum
Eleven talks, from materials to the manufacturing floor
Following the forum programme, this field collection traces materials, devices, encapsulation, measurement and applications. Each article ends with public sources for further reading.
Start reading
Forum field notes
Talk articles
Read in forum order, or begin with the technical question that interests you most.
Atsushi Wakamiya · Kyoto University
Materials and Process Control for Perovskite Solar Cells
From trace water in precursors to film formation, scale-up and lot-to-lot yield.
Tae-Woo Lee · Seoul National University
Stability and Scalable Manufacturing of Perovskite LEDs
As pixels shrink below two micrometers, color, lifetime and manufacturing must hold alongside efficiency.
陳重仁 · 澄毓綠建築
BIPV Design Across the Building Life Cycle
How a power-generating panel that looks like stone brings photovoltaics into building design, maintenance and replacement cycles.
黃建中 · 火種源科技
High-Throughput Platforms and the Memory of a Laboratory
After producing 36 cells in five hours, the real bottleneck is preserving failed paths and deciding what comes next.
高登智慧科技
Designing a Body-Fat Scale Powered by Indoor Light
Turning a transparent glass panel into the light-entry surface, then working backward from household use to generation and storage needs.
陳俊成 · 舞雲永續
Field Measurement for Colored BIPV
Why the intersection of color, sunlight and building façades calls for a mobile measurement cube.
胡書華 · Solar Applied Materials
Low-Temperature Processing and Material Circulation for IXO Transparent Electrodes
What one fewer high-temperature annealing step changes—and how it reaches flexible devices and indium supply.
孫銘賢 · 睿生光電
Resolution and Sensitivity in Perovskite X-Ray Imaging
How a sharper yet less sensitive image exposed the trade-off that mattered most.
李晏成 · Everlight Chemical
UV-Cured Encapsulation for Perovskite Solar Cells
How a liquid adhesive reaches the interface, avoids thermal damage and returns to stress testing on a complete device.
趙清煙 · Lumtec
Materials and Interface Trends in Inverted Perovskite Devices
Why material questions move toward contact position, molecular packing and supply capability as the efficiency gap closes.
廖清霖 · Enlitech
Perovskite Efficiency Measurement and Production-Line Inspection
Starting from an efficiency number, EQE, LBIC and PL narrow the problem until it becomes actionable.